D&R AirMate-USB 12 fader Mixing Console 1x Hybrid/1x VoIP/2x USB

D&R AIRMATE-USB 12 channel triple input radio ON-Air / Production mixer with 1x Hybrid, 1x VoIP and 2x USB interfaces

The D&R AIRMATE-12-USB is an 12 fader, 34 input triple input Mixer, capable of accepting:

* 10 bal Mic inputs, 3-band EQ and inserts for voice Processors.

* 22 stereo line inputs where every line B input can accept  our optional RIAA pre-amp module to work with

   turntables.

* 2 USB stereo inputs (for radio play-out systems, such as  our AIRCAST).

* 2 Telephone Hybrids or VoIP channels built in with RJ-11 connectors for phones and landlines.

* Fader and On-start on all 12 channels.

* ON-AIR light switching built in.

* Built in Talkback mic with routing to Clean-feed, Aux

   and/or Announcer outputs.

* Auto Control Room Monitor cut when in DJ mode.

**All models can have an AES digital output, and RIAA preamps. Please contact us**

Faderstarts and Cleanfeeds are standard

We designed the Airmate-12-USB broadcast mixer for those situations where more mic inputs are needed.

Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs 10 Mic inputs an internal Telephone Hybrid (2x) and USB connection to the PC (e.q. for streaming to the web). A heavy duty 19" rack mounted RF shielded chassis houses 12 vertical triple input modules giving flexibility rarely found in a mixer of this type.  Ten input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors. And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

Built in Telephone Hybrids

This new Airmate-USB model has 10 balanced mic inputs (+48 phantom is standard) with insert, 20 stereo line inputs, 2x USB and 2x Telephone Hybrids. Channel 9 and 10 have Mic/Line and USB interface to transfer audio from and to your PC.  Channel 11 and 12 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach.

High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy.

With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.

But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure.

The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-10. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers.

A clean feed send is available for external analog and digital Hybrids.

Built in VoIP or Hybrid channels

We also offer dedicated VoIP channels for the AIRMATE-12-USB, or a combination of one Hybrid module and one VoIP module.

If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module.

The D&R Airmate-12-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal.

In addition, there is a special Radio On-air/production section featuring; Self­-op switching to automatically cut control room level when the D.J. mic is active;

a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.

A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.

The focal point in a production studio

The D&R Airmate-12-USB is designed to be the focal point for local radio production work in the studio or at home. It’s compre­hensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs.

OPTIONAL: the D&R On Air Lamp with everlasting high intensity red leds.

The unit is powered by a 12 volt DC 450 mA external power supply which is included in the price.

And what's more... no hassle with how do I connect this thing to my AIRMATE-12-USB.

No complicated AC switching with external relays etc. etc.

You only need one stereo cable (wired tip/ring) coming from the MIC-ON (located in the master section)  connector on the back of the AIRMATE-12-USB console that goes directly hardwired to a barrier strip inside the ON-AIR LAMP.

The power adapter will also be directly wired to the barrier strip inside the unit.

Cable entry holes and key slot holes in the backside.