Sonifex CM-MS3 Single 3 Way Passive Microphone Splitter

Sonifex CM-MS3 Single 3 Way Passive Microphone Splitter

318,00 EUR

Modell/Artikelnr.: SF-CM-MS3
Lagerstatus: Bitte erfragen Sie unsere Lieferzeit
Stück

Sonifex CM-MS3 Single 3 Way Passive Microphone Splitter

CM-MS3 Single 3 Way Passive Microphone Splitter

The CM-MS3 is a passive “one-to-three” splitter housed in a small but robust aluminium box. It is designed to split a single microphone or line source to up to three destinations, using Neutrik XLR connectors.

Wide Signal Range Capability

The CM-MS3 uses high quality audio transformers that are capable of accepting input levels up to +18dBu, making the splitter useful in both microphone and line level splitting applications.

Versatile Phantom Powering Options

The CM-MS3 offers three methods of providing phantom power to a microphone connected to its input:

  • From the external +48VDC power connector.
  • From a microphone amplifier connected to output 1 (direct)
  • From a microphone amplifier connected to output 2 (phantom loopback)

 

Controlling which method is used to provide phantom power is achieved with simple push switches. It is possible to concurrently power a microphone using any two of the above methods without degrading audio performance, thus providing power supply redundancy.

Ground Loop Hum Elimination

Ground loop hum problems can be quickly eliminated using the push switches to lift pin 1 of the output connectors (output 2 and 3 only).

CM-MS3 Technical Specification

Test

Conditions

Results

Frequency Response • Ref. -6dBu, 1kHz
• Source impedance = 150Ω
• Load impedance = 10kΩ
10Hz - 30kHz ±0.5dB
Total Harmonic Distortion • Ref. +3dBu, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
0.02%
Total Harmonic Distortion 0.1% • Ref. 0.1%THD+N, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
+13dBu
Total Harmonic Distortion 1% • Ref. 1%THD+N, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
+18dBu
Common Mode Rejection Ratio • Ref. 20kHz
• Source impedance = 600Ω
• Load impedance = 10kΩ
>60dB
     

Equipment Type

CM-MS3 Single 3 way passive microphone splitter.  
     

Physical Specification

Dimensions (Raw): 7.7cm (W) x 8.3cm (D) x 4.2cm (H)
3.0” (W) x 3.3” (D) x 1.7” (H)
 
Weight: Nett: 0.30kg Gross: 0.40kg
Nett: 0.66lbs Gross: 0.88lbs
 

Tags des Produkts

Es wurden keine Tags registriert.

Mine tags