Glensound DARK1616D
Dante/AES67 Network Audio 8x AES3 Inputs 8x AES3 Outputs interface
The Glensound DARK1616D is a digital to digital converter designed to connect AES3 audio circuits to/ from a Dante/ AES67 audio network.
Dante network audio is a common protocol for distributing high quality linear audio over standard IP networks and it is widely used by many audio equipment manufacturers. The Glensound Dark1616D Dante audio interface will be compatible with any other manufacturers Dante audio interface. Further details of Dante network audio can be found at www.audinate.com
Being designed for live on-air broadcast applications the Glensound Dark1616D has been designed with multiple redundancy capabilities. It has 2 mains power sources and it also has fully redundant network connections for both Copper & Fibre circuits.
The Glensound Dark1616D provides 8 balanced AES3 inputs and 8 balanced AES3 outputs to the Dante network on rear panel D25 connectors wired to AES59 (also known as the Tascam standard).
As per our other Dante equipment 0dBu = -18dBFs
Features
- 8 off AES3 audio inputs and 8 off AES3 audio outputs
- 16 off Analogue audio inputs and 16 off Analogue audio outputs
- Redundant Network connections
- Network link status GPOs
- Connection to Dante / AES67 network for control and configuration
- 1u 19” rack
- Redundant Power Supply
Product Specs
| Analog Audio | |
| Maximum Input Level | +18dB |
| Maximum Output Level | +18dBu |
| Input Impedance | >20k Ohm |
| Output Impedance | = |
| Distortion | 0.0013% @ 100Hz 0.0022%@1kHz 0.00094% @ 10kHz Reference to +8dBu output |
| Noise | -93dB@line up A weighted RMS |
| Dynamic Range | 111dB |
| Input And Output Type | Electronically balanced (can be wired unbalanced) |
| Digital AES3 Audio | |
| Frequency Response | flat to 22kHz |
| Maximum Input And Output Level | 0dBFs |
| Input And Output Impedance | 110 ohm |
| THD+N | 0.00018% relative |
| Noise | >-123dB (residual) A weighted RMS |
| Inputs And Outputs | transformer balanced |
| Dynamic Range | >141dB |
| Input Frequency | 16-192kHz (sample rate converted to meet Dante network frequency) |
| Output Frequency | 44.1, 48, 88.2, 96, 192kHz (output matched Dante network) |
| Power | |
| Connections | 2 x mains inputs filtered IEC, 100 to 240 VAC 47-63Hz |
| AC Consumption | 18 watts@230VAC |
| Internal Mains Fuse | 20mm 1A anti surge |
| Physical | |
| Audio Connectors | 25 way D connectors wired to AES59 |
| Alarm Connector | 9 way D socket |
| Alarm Type | solid state relay |
| Size | 1RU 19” 300mm deep excluding connectors |
| Net Weight | 3.3kg |
| Shipping Carton | Rugged export quality cardboard 610x420x130mm LxDxH |
| Shipping Weight | 4.8kg |
| Titel | Sorte | Größe | Herunterladen |
|---|---|---|---|
| Glensound-AES67-Dante-guide-17.pdf | 352.74KB | Herunterladen |
